C Series Automatic Material-lifting Isostatic Press

General Control System

With picture touch screen, membrane switch.

1. Using the touch screen produced by OMRON company, the system responds quickly when fingers touch the buttons on the screen.

2. Friendly human-computer interface, which is easy to understand how to set the working parameters.

3. It has powerful data recording and display functions, and dynamically displays pressure change curves in real time.

4. The membrane switch is attached to the surface of the control cabinet, and its graphical design makes it easy to be understood.

Full Control System

1. Using the touch screen produced by OMRON company, the system will make an immediate response after your figures touch the button on the screen.

2. Friendly human-computer interface, which is easy to set the pressurization and depressurization speeds.

3. It has powerful data recording and display functions, and dynamically displays pressure change curves in real time.

4. The membrane switch is attached to the surface of the control cabinet, and its graphical design makes it easy to be understood.

To ensure the safety production of the isostatic press, there are multiple security protection settings.

1. Manual pressure relief valve. In case of any emergency or failure, open the valve manually to enable the pressure relief protection, and the pressure can be increased again after closing it.

2. The hydraulic system has a preset pressure value, and when the preset pressure value is exceeded, the relief valve will automatically overflow.

3. Pressure sensor and electrical apparatus control system. When the pressure is higher than the preset pressure value, the electrical control system automatically stops the operation of the boosting system.

4. The control cabinet is equipped with an emergency stop button. After starting, the equipment can stop working in any working stage.

5. Interlocking of electrical control procedures. The equipment runs in strict accordance with the working procedure. If the previous procedure is not completed or there is a malfunction, the next procedure cannot be carried out, and the operation fault message will be sent out. After troubleshooting, the working can continue.