You are here: Home » Product » T Series Ultra-High pressure CIP » 700MPa Ultra-High pressure CIP

Product Details

loading

Share to:
sharethis sharing button

700MPa Ultra-High pressure CIP

Maximum Working Pressure: 700MPa
Versatility: Ideal for both experimental research and industrial production
Application Areas: Advanced material preparation / Extreme performance testing / Theoretical model validation
  • T150

Availability:
Quantity:

The equipment features the following:

1.Wire-wound structure for the frame and high-pressure vessel

2.Full tie-rod intensifier design, eliminating stress concentration

3.Constant-speed pressurization and depressurization with precise and controllable rates

4..Ideal for both industrial production and experimental research

5.Maximum working pressure: 700MPa

Touch screen + membrane switch (servo control system)

1. Adopt the touch screen of OMRON company, the system will make an immediate response after your figures touch the button on the screen.

2. Friendly human-computer interface, which is easy to set the pressurization and depressurization speeds.

3. It has powerful data recording and display functions, and dynamically displays pressure change curves in real time.

4. The membrane switch is attached to the surface of the control cabinet, and its graphical design makes it easy to be understood.

The entire equipment adopts a thickened sheet metal shell fully wrapped design, and all high-pressure components are installed inside the equipment. There are multiple security protection settings to ensure the safety production of the isostatic press

1. Manual pressure relief valve. In case of any emergency or failure, open the valve manually to enable the pressure relief protection, and the pressure can be increased again after closing it.

2. The hydraulic system has a preset pressure value, and when the preset pressure value is exceeded, the relief valve will automatically overflow.

3. Pressure sensor and electrical apparatus control system. When the pressure is higher than the preset pressure value, the electrical control system automatically stops the operation of the boosting system.

4. The control cabinet is equipped with an emergency stop button. After starting, the equipment can stop working in any working stage.

5. Interlocking of electrical control procedures. The equipment runs in strict accordance with the working procedure. If the previous procedure is not completed or there is a malfunction, the next procedure cannot be carried out, and the operation fault message will be sent out. After troubleshooting, the working can continue.

Previous: 
Next: 

Product Categories

Contact Us

Address: No. 11, Guangli Mechanical Processing Industrial Park, Yangqu Town, Jiancaoping District, Taiyuan City, Shanxi, China
Phone: +86-351-5268841
Cell Phone: +86-13182814961
E-mail: sales@sxkyyc-cip.com
Shanxi Golden Kaiyuan Co., Ltd.

Quick Links

Product Category

Contact Us

No. 11, Guangli Mechanical Processing Industrial Park, Yangqu Town, Jiancaoping District, Taiyuan City, Shanxi, China
Postcode: 030008
+86-351-5268841
sales@sxkyyc-cip.com
Copyright  2020 Shanxi Golden Kaiyuan Co., Ltd.
Sitemap| Supported By Leadong